Washing Machine Repair

Masters of the service centre service equipment of various brands Bosch, Electrolux, Zanussi, Ariston and others.

Our employees take into account the peculiarities of different manufacturers and models. The manufacturer’s recommendations are observed and applied exclusively original spare parts.

Samsung, LG, Whirlpool, Maytag, GE, Frigidaire, Electrolux, Speed Queen, Miele, Bosch, Splendide, Spin-X, Staber, Sports Laundry Systems, UniMac, Maytag Commercial Laundry, Advance Energy Tech., Modern Maid

If your washing machine suddenly breaks down, don’t worry! At our service center, you can order repair for any malfunction.

Please provide us with as much information as possible about all the signs of the problem you have noticed. Don’t forget to specify the brand and model of your washing machine, as well as the year of manufacture. You can do this by filling out the form or contacting us by phone. This way, the specialist will be fully prepared for the visit and bring all the necessary tools. All work comes with a warranty!

When dealing with such complex appliances, do not attempt to repair them yourself, as this can only worsen the damage! By contacting us, you will receive service from a professional technician who will not only eliminate the cause and consequences of the malfunction but also provide expert advice on how to avoid similar breakdowns in the future, check the appliance’s functionality in all operating modes, clean the filters, and remove any possible foreign objects.

Which washing machines do our technicians repair?

Our service center technicians repair appliances from various brands—Bosch, Electrolux, Zanussi, Ariston, and others.
Our team is familiar with the specifics of different manufacturers and models. We follow the manufacturer’s guidelines and use only genuine replacement parts.

Our services include:

Replacing the door seal;
Clearing drain system clogs;
Repairing or replacing components and parts—temperature sensor, valves, pump, and others.

When is urgent washing machines repair needed?

A washing machine is an essential household helper, and a breakdown can seriously disrupt your routine. Some problems require immediate attention to avoid further damage or flooding. Here are the main signs that your washer needs urgent repair:

1. Washer Won’t Turn On

• Signs:
  • Doesn’t respond to the power button.
  • No display lights (if applicable).
• Possible causes:
  • Power outlet or wiring issues.
  • Blown power filter or fuse.
  • Faulty electronic control board.

🚨 What to do? Check the power supply. If the outlet is fine, call a professional technician.

2. Water Leaks

• Signs:
  • Water leaking from underneath or around the door.
  • Puddles on the floor after washing.
• Possible causes:
  • Damaged inlet or drain hose.
  • Worn door seal (gasket).
  • Cracked tub.

🚨 What to do? Immediately unplug the machine and shut off the water supply. Call a technician right away to prevent flooding.

3. Washer Does Not Drain

• Signs:
  • Water stays in the drum after the cycle.
  • Washer doesn’t enter spin cycle.
  • Error codes (e.g., E02, E10) appear.
• Possible causes:
  • Clogged drain filter or hose.
  • Broken drain pump.
  • Blockage in the drain line.

🚨 What to do? Check the drain filter (usually behind a small door at the bottom). If that doesn’t work, professional repair is needed.

4. Water Doesn’t Heat

• Signs:
  • Washing happens with cold water even on hot setting.
  • Clothes aren’t cleaned properly.
• Possible causes:
  • Broken heating element (heating coil).
  • Faulty thermostat or temperature sensor.
  • Electronic control issues.

🚨 What to do? Heating element replacement or control board diagnostics are required.

5. Loud Noise, Grinding, or Vibration

• Signs:
  • Loud humming, banging during spin.
  • Washer shakes or “jumps.”
• Possible causes:
  • Worn drum bearings.
  • Foreign objects (coins, buttons) inside.
  • Loose shock absorbers or suspension springs.

🚨 What to do? Stop using the machine to avoid damage to the tub or motor.

6. Drum Does Not Spin

• Signs:
  • Machine runs but drum stays still.
  • Clothes don’t tumble.
• Possible causes:
  • Broken drive belt.
  • Burned-out motor.
  • Jammed bearing.

🚨 What to do? Don’t run the washer. Belt or motor replacement is necessary.

7. Burning Smell or Smoke

• Signs:
  • Smell of burning wires.
  • Smoke coming from the machine.
• Possible causes:
  • Short circuit.
  • Motor overheating.
  • Electronic faults.

🚨 What to do? Unplug immediately. Continued use is dangerous.

8. Error Codes on Display (E01, E10, E20, etc.)

• Modern washers show error codes indicating specific problems.
• For example:
  • E01 / E10 — water supply issues.
  • E02 / E20 — draining problem.
  • E04 / E40 — water overflow.

🚨 What to do? Refer to your manual for code meanings and call a repair technician.

Masters of the service centre perform a complete service, starting from the elimination of small problems and ending with complex repairs