Microwave Repair

Masters of the service centre service equipment of various brands Bosch, Electrolux, Zanussi, Ariston and others.

Our employees take into account the peculiarities of different manufacturers and models. The manufacturer’s recommendations are observed and applied exclusively original spare parts.

LG, Samsung, Whirlpool, GE, Panasonic, Sharp, Miele, Frigidaire

If your microwave suddenly breaks down, don't worry! At our service center, you can order repair for any malfunction.

Please provide us with as much information as possible about all the signs of the problem you have noticed. Don’t forget to specify the brand and model of your washing machine, as well as the year of manufacture. You can do this by filling out the form or contacting us by phone. This way, the specialist will be fully prepared for the visit and bring all the necessary tools. All work comes with a warranty!

When dealing with such complex appliances, do not attempt to repair them yourself, as this can only worsen the damage! By contacting us, you will receive service from a professional technician who will not only eliminate the cause and consequences of the malfunction but also provide expert advice on how to avoid similar breakdowns in the future, check the appliance’s functionality in all operating modes, clean the filters, and remove any possible foreign objects.

Which Microwaves  do our technicians repair?

Our service center technicians repair appliances from various brands—Bosch, Electrolux, Zanussi, Ariston, and others.
Our team is familiar with the specifics of different manufacturers and models. We follow the manufacturer’s guidelines and use only genuine replacement parts.

When is urgent repair needed?

A microwave oven is one of the most used kitchen appliances, and when it breaks down, it can seriously disrupt your daily routine. Some problems require immediate attention because they could be dangerous. Here are the main signs that your microwave needs urgent repair:

1. Microwave Won’t Turn On

• Signs:
  • No response when pressing buttons
  • No light or display illumination
  • Timer doesn’t work
• Possible causes:
  • Power issues (outlet, plug, power cord)
  • Blown fuse
  • Faulty control board
  • Broken door switch

🚨 What to do? Check power supply and circuit breakers. If the problem isn’t there, call a professional technician immediately.

2. Runs but Does Not Heat

• Signs:
  • Microwave turns on, fan runs, and plate rotates
  • Food remains cold after heating
• Possible causes:
  • Burnt-out magnetron (main heating element)
  • Faulty high-voltage diode or capacitor
  • Transformer issues

🚨 What to do? Stop using the microwave immediately and call a specialist.

3. Sparks Inside the Cavity

• Signs:
  • Visible electrical discharges when operating
  • Bright flashes of light
  • Crackling or popping sounds
• Possible causes:
  • Damaged mica plate
  • Metal objects inside
  • Worn waveguide insulation

🚨 What to do? Unplug immediately—this is a fire hazard.

4. Loud Buzzing or Crackling Noise

• Signs:
  • Unusually loud sounds
  • Vibration of the microwave casing
  • Strange noises during operation
• Possible causes:
  • Faulty cooling fan
  • Transformer problems
  • Issues with the turntable mechanism

🚨 What to do? Stop using and get a professional diagnosis.

5. Door Doesn’t Close Properly

• Signs:
  • Visible gap when closing door
  • Microwave won’t start or shuts off mid-cycle
  • Microwave radiation leakage
• Possible causes:
  • Warped door or casing
  • Worn door seal
  • Broken locking mechanism

🚨 What to do? Do not use it until fixed—this is a health hazard.

6. Smoke or Burning Smell

• Signs:
  • Smoke coming from ventilation or cavity
  • Strong smell of burning plastic or wiring insulation
• Possible causes:
  • Overheated electronics
  • Fire inside cavity
  • Electrical short circuit

🚨 What to do? Unplug at once. If there is fire, use a fire extinguisher.

7. Microwave Turns On or Off By Itself

• Signs:
  • Microwave powers on without user input
  • Stops working intermittently
• Possible causes:
  • Control board malfunction
  • Faulty button panel
  • Power circuit short

🚨 What to do? Disconnect power and call a repair technician.

8. Error Codes on Display (E01, F2, H97, etc.)

• Modern microwaves display error codes indicating specific problems, such as:
  • E1/E01 — Temperature sensor issue
  • F2/F02 — Magnetron fault
  • H97 — Fan error

🚨 What to do? Look up the code in the manual and call a qualified technician

Masters of the service centre perform a complete service, starting from the elimination of small problems and ending with complex repairs